Top 5 Best 3d Printer for 28mm Miniatures in 2020 (Reviewed)

All, thanks to 3D printing technology, we can now easily print our favorite miniatures and whatnot. But before we jump into buying the best 3D printer for 28mm miniatures, let’s get into some basics of 3D printers.

There are two kinds of printing machines you can use to print miniatures: SLA and FDM. The SLA printer uses a photopolymer liquid resin to print your model. This liquid hardens when it is exposed to the laser or digital light. In this way, each layer is built to complete your model.

On the other hand, the FDM printer uses filaments to print your 3D structure. These filaments are melted using an extruder with a hot-end.

Both types of printers have their share of pros and cons. FDM printers are quite cheap, the printing process is easy, and your over-all print cost also reduces. Whereas, SLA printers are expensive and the printing process is complicated. But in terms of print quality, it is better than FDM.

So, based your printing needs and budget, you can choose a model that suits you the best from the list of best 3D printer for 28mm miniatures mentioned below.

Quick Overview: Best 3d Printer for 28mm Miniatures



Build Volume


Buy Now

Comgrow Creality Ender 3 3D Printer

Top Pick

Comgrow Creality Ender 3 3D Printer

220 x 220 x 250mm


ANYCUBIC Photon UV LCD 3D Printer

ANYCUBIC Photon UV LCD 3D Printer



FlashForge 3D Printer Creator Pro

FlashForge 3D Printer Creator Pro

225 x 145 x 150 mm


Official Creality Open Source CR-10 3D Printer

Official Creality Open Source CR-10 3D Printer



Monoprice Maker Select 3D Printer

Monoprice Maker Select 3D Printer

200 x 200 x180 mm


Top 5 Best 3d Printer for 28mm Miniatures in 2020 

Comgrow Creality Ender 3 3D Printer

Comgrow Cerality Ender 3 is a great FDM printer for anyone starting out with 3D printing. It is reasonably priced and has amazing features and print quality. 

When you open the package, you’ll find several parts that need to be assembled using nuts and various tools. All the tools needed are provided with the unit to complete the full setup. So, overall the step is an easy process and takes about a few hours. 

The printer looks durable and is made of good quality materials. It has a build volume of 220 x 220 x 250mm and the BuildTak-like print bed works amazingly well to provide an optimal printing surface to the object and easy removal of completed builds. 

Moreover, the high-watt hot bed ensures fast heating and needs only 5 minutes to reach 110℃. This 3D printer has the ability to resume printing even after a power outage or lapse occurs, so you no longer have to worry about your printer getting disconnected.

Furthermore, V-slot wheels moving along the aluminum extrusions makes the movement of the printer noiseless and you can smoothly move the printer even when the printing process is on.

Lastly, the printer has an LCD that lets you control all the settings easily making it one of the best 3D printer for 28mm miniatures for beginners.


  • Easy Setup
  • Affordable and great for novice users
  • High-quality prints
  • Compact design
  • Supports print with many filaments


  • Unsteady base
  • X-axis belt can be loose
  • Adhesion Problems with Stock Bed
ANYCUBIC Photon UV LCD 3D Printer

As we know there are two kinds of printers: FDM and SLA. AnyCubic Photon printer is a resin-based 3D printer. Its pocket-friendly price, fascinating features, and satisfactory reviews and ratings make it a popular choice for people looking forward to buying a printer with DLP technology.

AnyCubic Photon printer comes with a printing volume of 115mmx65mmx155mm. Moreover, it has an XY resolution of 47 microns and Z layer height down to 10 microns that successfully generates 3D models with amazing detail.

The printer is equipped with a 5.5 inch of 2K screen resolution that delivers models with smooth and precise details. It also has a maximum layer resolution of 25 microns.

With regards to printing, it uses 405nm photosensitive resin as the printing material and can deliver high-speed printing of 20~30mm/h. This means the printer will take bout 2-3 hours to print a larger miniature. Moreover, it prints the object from top to bottom. 

The setup process may take some time but is quite easy. Most of the parts are already assembled, you’ll only need to connect a few. It is a 3-step process where you have to assemble the build platform, level the printer, and lastly, assemble the resin vat. 

While you are assembling you’ll realize that the printer uses high-quality CNC parts. Last but not least, its touchscreen interactive interface allows you to preview and monitor print status in real-time.


  • Comes almost fully assembled
  • Detailed print quality
  • Ships with a user-friendly slice
  • Affordable
  • Multiple models on a build plate don't add to the build time


  • It has a limited build volume, hence suitable for small models
  • Printing cost can be high
FlashForge 3D Printer Creator Pro

The FlashForge 3D printer has more than 1000 customer reviews and an average of 4.4-star rating. This printer is pricey compared to the other printers discussed before. So, let’s check out if the features justify its price.

The directions are clear and the tools required to set up and install the device are provided with the box. This makes the setup process super easy and within no time you can start using the printer.

With its 11-micron layer resolution, FlashForge Creator Pro has a build volume of 225 x 145 x 150 mm and will happily print minis as small as 28mm.  Known for its dual extruder, the 3D printer allows you to print structures of two-colored materials simultaneously.

Moreover, you can also use second dissolvable filament as a support material to give fine details to your model. The support also does not leave marks on the model and you can even place it in water to eliminate all the extra supports.

This saves both your time and effort to clean your miniatures. Additionally, the printer supports PLA and ABS filaments. FlashForge Creator Pro has an integrated LCD screen and button board functions for easy control. 

Furthermore, the printing area is illuminated by an LCD light, so you can easily check on your print.  The machine prints from SD card or over USB cable but not wifi. Lastly, along with this printer, you’ll get 2 spools filament to start printing as soon as you take it out of the box.


  • Dual extrude
  • Easy Setup
  • Use dissolvable filament as a support material
  • Can deal with various filaments and materials
  • Easy to eliminate all the extra supports


  • Spool holder doesn’t fit spools from other filament vendors
  • Less connectivity options
Official Creality Open Source CR-10 3D Printer

Official Creality Open Source CR-10 is a legend 3D printer that offers you the largest build spaces of all the printers. With a build space of 12inx12inx15.5in, it becomes an excellent choice for any hobbyist, student or educator who is looking to create wonderful and custom projects for work, education, or fun.

Talking about its print quality, you can print models with a resolution as high as 100 microns. The heated bed has an operating range of up to 115*C and is capable of heating the hotbed to 70*C in under 5 minutes. 

CR-10 has a high-quality aluminum extrusion frame and a nearly all-metal construction that makes it durable and you can operate it for as long as 200 hours continuously.

Assembling the Official creality will take time but is as simple as ABC but it will and so is the navigation process. In terms of connectivity, you can either connect the device using an SD card or USB cords. 

Furthermore, the printer comes with a reliable and flat glass bed that ensures a 100% usable and flat surface for any size of the print model.


  • Large build volume
  • Easy to assemble
  • Go-faster stripes included
  • Amazing print quality
  • Can print large models


  • Tangles in the filament spools
  • Can be difficult for beginners
Monoprice Maker Select 3D Printer

We shall conclude the list of the best 3D printer for 28mm miniatures with another affordable FDM printer - Monoprice Maker Select V2.

For starters, the printer has a large 8 x 8 inches build plate and 7 inches vertical spacing that lets you print not only just small but even large complex models. You get a printing speed up to 70 mm/s and the extruder can hit a maximum temperature of 260°C.

It is also easy to assemble and includes everything you need to begin printing right out of the box like a heated build plate, 2 Gb micro sd card with sample model 3D files, and sample PLA filament.

Additionally, the printer has the ability to print slower cooling materials like PLA and ABS and other fancy materials like jelly, foam, felt, etc. The Monoprice uses Cura as a recommended slicer to divide or "slice" the 3D model into thin horizontal layers.

Select V2 has an LCD display on its power supply box that shows the printing progress while it is operating. And once the printer finishes the printing, you can take out your model for use. But the model tends to stick to the print surface making it difficult to remove quickly.


  • Affordable
  • Good build size and print quality
  • Supports varieties of materials
  • Compatible with different slicers


  • Tricky bed leveling process
  • Adhesion issue

Final Words

We hope this article helped you find the “best 3D printer for 28mm miniature". If it did, make sure to share which product you liked the best and why in the comments section below.

And if you want us to review some specific products, let us know too. Happy shopping!

If you are looking for some label makers, do read our reviews on best label makers for home use before buying one.